Mitel manual Synchronous Parallel Port With ST-BUS Clock Slave, Sfdi = MT90840

MT90840							Preliminary Information
						CPU
			MT90840
	8 kHz TX	PPFT	SFDI = 0	STi0-7		8	STi/o 0-7
8	Data TX					8	STi/o 0-7
		PDo0-7		STo0-7				ST-BUS
		TX/RX Clock						Components
8	Data RX	PCKR					4.096 MHz
		PDi0-7		SPCKo
							8 kHz
8 kHz	8 kHz RX				F0o
		PPFRi	C4/8R1 & 2
Source
			4.096 MHz or
			8.192 MHz
			PLL				(8.192 MHz)
		PPFT	C4/8R1 & 2			8	STi/o 0-7
				STi0-7
8	Data TX					8	STi/o 0-7
		PDo0-7		STo0-7
8	Data RX	PCKR					4.096 MHz
		PDi0-7		SPCKo
					F0i
		PPFRi	SFDI = 1
			MT90840
						CPU
	Figure 6b - TM2 Multiple-MT90840 Configuration

Timing Mode 3 (TM3) - Bus Slave

Synchronous Parallel Port With ST-BUS Clock Slave

Timing Mode 3 is used where the main TDM clock ref- erence resides on the parallel port side of the system, and where the receive parallel port and the transmit parallel port are aligned. (An example is a node on a backplane.) Timing on the serial port is tightly tied to the receive parallel port, and the transmit parallel port is clocked by the receive parallel port clock. In TM3, PCKT and PPFTo are not used. See Figure 7 for a connection example.

In TM3, the MT90840 timing is controlled by the parallel port frame pulse (PPFRi) and clock (PCKR).

The MT90840 generates the serial port output frame pulse (F0o) locked to PPFRi. TM3 is similar to TM2 with two main differences: the parallel Bypass Path is disabled, and the parallel port receive and transmit buses are synchronized and both aligned with PPFRi. A fixed offset exists between F0o and PPFRi due to serial-to-parallel conversion. The MT90840 will align F0o so that it proceeds PPFRi by 3.8 μsec.

In TM3 the internal clock divider circuit is always enabled, regardless of the state of the INTCLK bit (C4/8R1 and C4/8R2 are unused). Therefore TM3 is limited to 19.44 and 16.384 Mbyte/s parallel port rates, and 2.048 and 4.096 Mbps serial port rates.

			MT90840
Aligned	8		PDi0-7	STi0-7	8	STi/o 0-7
	8				8	STi/o 0-7
Frames			PDo0-7	STo0-7			ST-BUS
		8 kHz REF
8 kHz			PPFRi				Components
Source						8 kHz
				F0o
		RX/TX Clock				4.096 MHz
			PCKR	SPCKo

CPU

Figure 7 - Timing Mode 3 Configuration

2-244