replace the battery, the phone prompts you for the date and time.

If you insert the SIM card incorrectly, the error message Check SIM! appears. Remove the cover and battery and make sure the SIM is inserted with the gold contacts facing down.

2If the mobile is locked, Code: appears.

Enter the 4 digit phonelock

code and press OK . The default is 4 zeros, e.g. 0000.

3If your SIM is PIN protected,

Enter PIN: appears.

Enter the PIN code and press

OK . An animated screen icon appears, then the stand- by display.

See page 35 to change your PIN and lock codes!

Stand-by display

From the stand-by display:

Press...

to...

 

enter phone menu.

 

directly access to numbers

 

stored in phone books.

 

access volume control.

 

access alert tones.

 

access the last dialled

 

numbers list.

 

stop the dialling or end a

 

call.

 

enter numbers in the dis-

-

play (see also "Speed dial-

 

ling", page 16).

 

 

See page 37 to set the time and date.

Holding your phone

How to hold

the phonestarted Getting

Avoid covering the upper back half of the phone so as to allow maxi- mum emission and reception quality.

Please be warned that you should not, when using the hands free mode, put the phone to your ear.

Making a call

The phone can make and receive calls only when it is switched on, unlocked (see page 15), has a valid SIM card inserted and has GSM net- work service coverage. If the phone cannot find a valid network the dis- play remains blank.

1Enter the desired telephone number using the numeric keys

( - ). You can enter a maxi- mum of 46 digits. Correct any mistakes by pressing Clear . Hold down this key or press

to clear the whole display.

11

Page 11
Image 11
Mitsubishi Electronics 110 manual Holding your phone, Making a call