Directly from the stand-by dis- play:

1Press displays Ring, Silent,

Vibrate, Vibrate & ring or Vibrate then ring.

Scroll to the desired setting.

2Press Select to validate your choice. (If any of the vibrate options are selected the

phone briefly vibrates). appears.

1. If you select Ring but the ring tone volume is off the icon appears.

2. appears if you select Vibrate, Vibrate & ring or Vibrate then ring. It takes precedence over .

3.When the phone is connected to either the Desk Top Charger, HF kit, CLA or AC adaptor the phone rings instead of vibrates.

4.If you choose the 'Vibrate' or 'Vibrate then ring' option, the vibrating action replaces all the alert and alarm tones.

Ring tone selection

To choose an incoming ring tone:

1Press . Select Settings.

2Select Phone settings. Select

Tones.

3Select Melodies.

4To help you identify incoming calls you can give the Stand- ard/Line 1, Phone names, SIM names and Line 2 calls and Alarm different ring tones.

Use or to highlight the required call type and press to select it.

5Use or to listen to the different ring tones. Press to select the current tone.

6Press and hold Exit or to return to the stand-by dis- play.

Volume adjustments

To individually adjust the volume level of the ring tone, key tones, alarm tones and incoming audio from the stand-by display, press . Alternatively, access Volume con- trol from the Settings menu:

1Press . Select Settings.

2Select Phone settings. Select

Tones.

3Select Volume.

4Select Ring, Keys, Conversa- tion or Alarm.

The display confirms the selec- tion, naming the volume to be adjusted.

5Use or to adjust the set- ting.

6Press OK to validate the setting.

7Press and hold Exit or to return to the stand-by dis- play.

During a call, you can adjust the conversation volume by using or .

If the ring tone volume level is set to 0 displays.

Automatic ramping

Your phone was designed with an automatic ramping feature. When your phone rings, the vol- ume level is lower than the vol- ume level you have set. Adjustment is made from low or medium volume level to the vol- ume level you have set (see “Vol- ume adjustments”, page 33).

This feature is a default setting and cannot be deactivated. Ram- ping and Automatic Ramping are compatible; both will work if Ramping is activated.

Ramping

Ramping causes the incoming ring tone to increase step by step to the maximum volume level.

The menu

33

Page 33
Image 33
Mitsubishi Electronics 110 manual Automatic ramping