6Press and hold Exit or to return to the stand-by dis- play.

Reminder - Call duration

You can set a call duration reminder in multiples of 1 minute (1 - 59 min.) intervals. It beeps at the set intervals.

1Press . Select Calls & Times.

2Select Call timers.

3Select Reminder.

4Select On (or Off).

5Select the period (between 1 and 59 mins).

6Press OK .

7Press and hold Exit or to return to the stand-by dis- play.

Call timer - reset

To reset all the call timers, you need the 4 digit phone lock code.

1Press . Select Calls & Times.

2Select Call timers.

3Select Reset.

4Select Yes or No.

5Enter the phone lock code and press OK .

6Press and hold Exit or to return to the stand-by dis- play.

Call costs management (subscrip- tion service only)

An Advice of Charge (AoC) subscrip- tion service shows the cost of the last call made, the accumulated to- tal cost of all calls and the remain- ing balance in units or currency of any 'cost limit' you set. Check with your service provider to see if they offer this feature.Select the curren- cy and cost per unit; otherwise call costs display in generic units.

To set currency and cost per unit:

1Press . Select Calls & Times.

2Select Call costs.

3Select Display cost type.

4Select Currency. The present currency settings appears.

5Press Edit . Enter the PIN 2 code and press OK .

6Enter the abbreviated letters of the currency. Press OK .

7Enter the cost per unit in the selected currency. Press

OK .

8Press and hold Exit or to return to the stand-by dis- play.

To set call cost type to units:

1Press . Select Calls & Times.

2Select Call costs.

3Select Display cost type.

4Select Units.

5Press and hold Exit or to return to the stand-by display.

When you set the cost type to units the credit limit and the remaining credit appear in units.

Setting the credit limit - in units or currency

You can set a credit limit in units or currency. The phone prevents mak- ing and receiving all chargeable calls when the phones reaches the credit limit. You can still make emergency calls.

1Press . Select Calls & Times.

2Select Call costs.

3Select Credit Limit. The present credit limit setting appears.

4Press Edit . Enter the PIN 2 code and press OK .

5Enter the credit limit (use to enter a decimal point). Press OK to validate.

6Press and hold Exit or to return to the stand-by dis- play.

When you enter a credit limit the selection from the 'Credit Limit' displays Edit or Set No Limit.

The menu

31

Page 31
Image 31
Mitsubishi Electronics 110 Reminder Call duration, Call timer reset, Call costs management subscrip- tion service only