Battery, Receiving a call | Mitsubishi Electronics 110 specification

2To dial (send) the number press .

The phone rings and the call con- nects like a normal telephone. A call timer appears.

You can prefix international calls with 00 or +. To enter the + symbol before a number press and

hold down .

You can also get the following mes- sages if the call does not connect or you use the second line:

Service number presentation

If you have the service number presentation your phone displays the following information.

	Your phone dis-	if the
		number
	plays...
		is...

	Unknown number,	unavaila-
	then Call1 when
		ble.
	connected

		available

Your phone

displays...

Busy

Not allowed (fixed dial- ling)

if the...

called party is en- gaged. number dialled is not authorised by the FDN list (see page 25).

call is made using the second line (see page 32).

	the caller’s number	but not in
	the caller’s number	phone
		phone
		books.
	Withheld number,
	then Call1 when	withheld.
	connected

If you have a second line, ap- pears when the call has been re- ceived on your line 2 number (see page 18 for details).

Rejecting the call

If the dialled number matches one stored in the phone book then the name of the called person appears in the display.

Receiving a call

The phone rings (or vibrates, see page 32 to set) when it receives a call. See page 33 to set the incom- ing ring tone. See page 34 to set the backlight.

Answering the call Press .

If the ring tone volume is set to zero (off) or if the phone has been set to 'Vibrate' mode, no sound is heard.

No ring

Pressing No ring stops the sound of the ring tone, which al- lows you to, for example, go out of a room before pressing .

To reject, or return a busy signal to the caller:

Press .

Ending a call

Press . The call timer stops and disappears.

Waiting a few seconds or pressing the Exit softkey returns the phone to the stand-by display.

The phone stores the caller's number, if available, in the received calls log (see page 29).

Turning off the phone

Press and hold down .

The mobile turns off.

Battery

Low battery warning

When the battery power falls to its lowest level the message Low Bat- tery! appears and a low battery

12

Image 12

Mitsubishi Electronics 110 manual Battery, Receiving a call, Ending a call, Turning off the phone, Low battery warning

Contents

English Table of contents Introduction General safety Vehicle safety Care and maintenance Emergency calls Battery use AC/DC adaptor chargersYour responsibility Security codes Key code, obtainable only from your service provider Call barring password 4 digitsDisposing of waste packaging PUK and PUK2 codes 8 digits Phone at a glance Graphic display Understanding the icons Preparing to make your first call Making your first call Holding your phone Making a call Battery Low battery warningReceiving a call Ending a call Charging the battery Disconnecting the chargerStandard Hours Battery Minutes FZ14240010 Removing the battery SIM card Please refer toRemoving the SIM card Remove the SIM card as shown be- low Standby display Important icons Dialling from memory Last dialled numbersSpeed dialling Hands free features Volume adjustmentSilent and vibrate alert modes Muting Pause feature Holding and retrieving a callAutomatically Call waiting network dependent Action when receiving a second call Multi-party or conference calls net- work dependent Access to the menus Menu mapEntering text Multitap text entry Network services Phone book@ ? Storing names and telephone num- bers Family or last NameFirst name An icon Free space in the phone book Viewing and calling numbers in the phone book Own number Fixed dialling numbers FDNPhone book tones Select the tone you want Messages SMS Creating a draft text Editing a draft textSending a new SMS message to one addressee Sending a new SMS message to many addressees Storing a new SMS message Modifying and re-sending messag- es in the outboxStatus request on sent messages Re-usable message templates Calls & Times Balance information subscription service only Call times Call timer reset Call costs management subscrip- tion service onlySetting the credit limit in units or currency Reminder Call duration Settings customising your phone Call costs resetting all costs to zeroPhone settings Show costs Automatic ramping Press . Select Settings Select Phone settings. Select Menu graphics Speed dialling Auto answer Phone lock code Time & date setting Fault settingsTures Ring Trium Mid values On for 10 sec. and mid value Off GSM services Melody downloadVoice mail Select Call Dialling proceeds as for a normal call Select from the divert options and press Network returns either Press Select to confirm the selection Select either Forbidden orSelect Search Within the us Use or to select the bar To cancel or check the status and press Broadcast cell broadcast messag- es Network ServiceSelect Message types. Press Scroll to the message type Using the office tools Scratchpad Auto-switch Select Off. Stored appearsCalculator Games Reshape and PushTrium 110 p games Internet/Wireless Application Protocol WAP Storing/editing connection settings operator providedCurrency-converter Personalising your connection set- tings Going onlineTo go online Press . Select Internet Using bookmarks Ending the online connectionCreating bookmarks Other site GSM man machine interface codes Using the headset Connecting the headsetUsing the headset Disconnecting the headset Appendix Glossary Trouble shooting Error messages Busy Call failed Cancelled. No type selected Invalid number Wrong phone lock code has been entered Guarantee Pan European ServicePan-european GSM End-user Guar- antee Conditions Declaration of Compliance Index SIM Page Page Page FA9M078910-A