2 - 1
2. INSTALLATION
2. INSTALLATION
CAUTION
Stacking in excess of the limited num ber of products is not allowed.
Install the equipment to incombustibl es. Installing them directly or close to
combustibles will led to a fire.
Install the equipment in a load-bearing place in accor dance with this Instruction
Manual.
Do not get on or put heavy load on the equipment to prevent injur y.
Use the equipment within the specified environmental condition range.
Provide an adequate protection to pr event screws, metallic detritus and o ther
conductive matter or oil and other com bustible matter from entering the s ervo
amplifier.
Do not block the intake/exhaust ports of the servo a mpl i fi er. Ot he rwi se, a fa ul t may
occur.
Do not subject the servo amplifier to dr op impact or shock loads as the y are
precision equipment.
Do not install or operate a faulty servo amplifier.
When the product has been stored for an extended period of time, consult
Mitsubishi.
When treating the servo amplifier, be careful about the edged parts such as the
corners of the servo amplifier.
2.1 Environmental conditions
Environment Conditions
[]0 to 55 (non-free zing)
Operation [] 32 to 131 (non-freezing)
[ ] 20 to 65 (non-freezing)
Ambient
temperature Storage []4 to 149 (non-freezing)
Operation
Ambient
humidity Storage 90%RH or less (non-condensing)
Ambience Indoors (no direct sunlight)
Free from corrosive gas, flammable gas, oil mist, dust and dirt
Altitude Max. 1000m (3280 ft) above sea level
[m/s2] 5.9 [m/s2] or less
Vibration [ft/s2] 19.4 [ft/s2] or less