Mitsubishi Electronics WD-62530 manual Hdtv Cable Box or Satellite Receiver with Component Video

22Chapter 2. TV Connections

HDTV Cable Box or Satellite Receiver with Component Video

If your cable box or satellite receiver has HDMI or DVI outputs, use the connections for HDMI or DVI video devices described later in this chapter.

Required: RCA component video cables, left/right analog audio cables.

A coaxial splitter, available at most electronic supply stores, may be required to complete this installation

1.Connect the cable from the outside cable or satel- lite service to CABLE IN or SATELLITE IN on the cable box or satellite receiver. See your device’s owner’s guide for instructions and cable compatibility.

	����������������������������
������������������������	���������������������������������
	��	�����
	�
	��	�
	��	�
��	�����	���
	��
���������
��������
��������
	��	��

���������
��������	�������������
��������

back panel. A coaxial splitter, available at most elec- tronics supply stores, may be required to complete this installation.

Note: To receive the benefits of digital surround sound, connect the digital audio output from your HDTV cable box or satellite receiver directly to your digi- tal A/V receiver

If your cable box or satellite receiver has HDMI or DVI outputs, please see “HDMI Device” and “DVI Device” connections later in this chapter.

Standard Cable Box, Satellite

Receiver, or Other Device with

S-Video

Required: S-Video cable and left/right analog stereo audio cables.

1.Connect the cable from the outside cable or satellite service to CABLE IN or SATELLITE IN on the cable box or satellite receiver.

2.Connect an S-Video cable from VIDEO OUT on the cable box or satellite receiver back panel to INPUT S-VIDEOon the TV back panel.

3.Connect left (white) and right (red) audio cables from AUDIO OUT on the cable box or satellite receiver to INPUT/AUDIO L and AUDIO R on the TV back panel.

Note: Refer to the cable box or satellite receiver Owner’s Guide for cable or dish antenna connections to the

�������

���

���������

�������

�����������

	�������������
			�����������������		�����
			�����������������		��������
			�������������������������������������
������������	� ���������� � ����� ���	��	��	��	� ���������� � ����� ���	� ���������� � ����� ���
					���������������������������������
					����������
	�������������				������	������
������������	������

���

������

�����

�������

���

������

�����

�������

������

������

receiver.

������������

������������

������������������

��������� ���������

��

Figure 3. Connecting an external HDTV receiver with component video connections

2.Connect RCA-type cables from the Y Pb Pr outputs on the cable box or satellite receiver to COMPO- NENT INPUT on the TV back panel, matching the colored connections.

3.Connect left (white) and right (red) audio cables from the cable box or satellite receiver to COMPONENT INPUT AUDIO L and AUDIO R on the TV back panel.

4.Optional: To allow use of the Split Screen feature with channels from ANT 1 and the cable box, connect the incoming terrestrial antenna or cable service (not satellite) to ANT 1/MAIN on the TV

�� ��������� ��

�����������

����

	��		��			�������������
�������		�������������
���							���
				�����������������		�����	������
				�����������������		��������	�����
				�����������������������		��������������	�������
							���
	�������						������
							�����
							�������
�������							������
����	�������
							������
	������������	� ���������� � ����� ���	��	��	��	� ���������� � ����� ���	� ���������� � ����� ���
						���������������������������������
						�����������
		�������������				������	������
	������������	������

Figure 4. Connecting a device with S-Video