Mitsubishi Electronics WD-62530 General TV Operation Symptom Remarks, TV Channels Symptom Remarks

Appendices 79

Appendix D: Troubleshooting, continued

General TV Operation

	Symptom	Remarks
1.	A fan is running even while the TV is powered	Normal TV operation. When the TV is off, internal components
	off.	continue to draw power and must be cooled by the fan.
2.	The TV remote control does not work.	• Check that the batteries are installed correctly.
		• Check that the slide switch is set to TV.
		• Be no more than 20 feet from the TV when using the remote
		control.
		• Program the remote control to operate the TV or other device
		(see Chapter 5).
3.	TV functions do not respond to the remote	Use the System Reset button.
	control or to front panel control and TV will
	not power off.
4.	When a device is selected from the Input	• Make sure the selected device is turned on.
	Selection menu, the screen is blue (no signal	• Begin play of the VCR.
	source).
5.	Devices are grayed out in the Input Selec-	Digital channels and digital devices cannot display in the Split
	tion menu or the Split Screen Input Selection	Screen sub-picture.
	menu.
6	You have forgotten your Parental Lock pass	See Appendix A, Bypassing the Parental Lock.
	code.
7	Rating restrictions are not working.	Open the Parental Lock menu and:
		• Verify that the U.S. Ratings or Other Ratings setting is On.
		• Check the Lock Time/Unlock Time to see if rating restrictions
		are disabled.
8.	On-screen displays appear each time you	Normal TV operation.
	change a function.

TV Channels

Symptom	Remarks
1. The TV takes several seconds to respond to	• Press ENTER after a channel number to avoid delays.
channel changes.	•	Use a 4-digit number for an over-the-air digital channel.
	•	Use a 6-digit number for digital cable channels if your cable
		service is able to recognize 6-digit channel numbers.

2. You cannot access a channel. • Use number keys instead of CH/PAGE / .

•Be sure the channel you want to view is in memory. See page 46.

•Check that the TV is turned to the correct device or antenna for that channel by pressing the INPUT key.

•Make sure the Parental Lock is off.

•If you cannot tune to a virtual digital channel even though the TV has already memorized digital channels, tune to the actual channel number used by the broadcaster. The virtual channel will then be automatically added to memory.

3. Name options are not available for some	Only memorized analog channels can be named.
channels.

4.When ChannelView™ list is displayed, infor- Available information is sent from the broadcaster or cable provider.

mation appears incomplete No other data is available.