Mitsubishi Electronics WD-62530 Appendix B Specifications, Picture Technology, Reception, Inputs

		Appendices	73
Appendix B: Specifications
Picture Technology
Projection System	3 LCD, 0.7” x 3, 1280 x 720 pixels
Lamp	132-watt high-pressure mercury discharge
Reception
	Over-the-Air: VHF 2–13, UHF 14–69
Channel Frequency Reception	Analog Cable: 1–125
	Digital Cable: 1–135
	Over the Air:	Analog NTSC, Digital ATSC with sub-channels (all 18 video
		formats)
Channel Type*
	Cable:	Analog NTSC (non-scrambled)
		Digital QAM 64 and 256 with sub-channels (non-scrambled)

*Note for Digital Channels: The channel numbers displayed on screen are determined by the broadcaster or cable company and can vary from the standard frequency number. If there is no channel-number information provided by the broadcaster or cable company, the TV creates a channel number. The created channel number uses the frequency number as the main channel number and the program number as the sub-channel number.

Inputs

Description	Qty.	Signal Type	Input Specifications
Antenna/Cable input	2	RF	F connector, 75-ohm
HDMI (digital video/audio)			HDMI standard connector
		HDMI EIA-861B standard	Video: 480i, 480p, 720p, 1080i
WD-52531 & WD-62531:	2
		for digital audio and video	Audio: PCM stereo
WD62530:	1
			Note: Not for use with personal computers.
			(Composite) Video: RCA Pin Plug, 1.0 V p-p,
Video (one side, two rear)	3			1.0 V p-p, 75 ohm
		NTSC 480i only	S-Video: Four-Pin DIN Plug
S-Video(one side, two rear)	3
				Y: 1.0 Vp-p 75-ohm
				C: 0.286 Vp-p (burst signal), 75-ohm
		EIA-770.1 & EIA 770.2	RCA Pin Plug (EIA-770.3 Standard Levels and
			Timing)
		480i, 480p, EIA 770.3
Component Video (Y/Pr/Pb)	2		Y:	1.0 Vp-p (includes sync), 75-ohm
		720p and 1080i (video
			Pr:	700 mV p-p, 75-ohm
		standards)
			Pb:	700 mV p-p, 75-ohm
Audio Inputs	6 pairs
WD-52531 & WD-62531:		analog left and right audio	RCA Pin Plug 500 mV (full scale), 43-k ohm
	5 pairs
WD62530: