Mitsubishi Electronics WD-62530 manual Split Screen Operations Instructions, PAUSE. Press

Chapter 3. TV Operation 37

Split Screen

Split Screen allows you to view pictures from two different sources at the same time. Split Screen is available when you have video sources connected to the TV in addition to any connections to ANT 1 and ANT 2.

Operation

Split Screen Operations	Instructions
Turn Split Screen on or off	Press SPLIT.
	Press		or	. The speaker icon appears briefly to indicate
Switch the sound source between main and	the source as either the main picture (left) or the sub-picture
sub-picture.	(right). The sound source is the side you can control with
	the remote control.
Check which picture is the sound source.	Press INFO. The speaker icon appears in the information display to
	indicate the active picture.
	1.	Press		to switch the sound source to the sub-picture.
	2. Press INPUT and move the highlight to the icon for the input you
Change the source of the sub-picture.		wish to view in the sub-picture (see figure 4).
	3. Press ENTER to make the change.
	Grayed-out input icons are unavailable as Split Screen sources or
	with the current source.
Change sub-picture channel (when the input	Press		to make the sub-picture the sound source, then press
source is ANT 1 or ANT 2.)	CH		/ .
Freeze or unfreeze the sub-picture image.	Press		(PAUSE). Press		again to return to normal video.
Change the size of the main and sub-pictures.	Repeatedly press FORMAT to cycle through picture sizes. See the
	following page for sample displays.
Make the sub-picture fill the screen.	1.	Press		to make the sub-picture the sound source.
	2.	Press SPLIT to close Split Screen mode.

Display choices. Press the FORMAT key repeatedly while in Split Screen mode to view different display options.

“SPLIT” appears under the Video icon to distinguish this menu from the Input Selection menu.

Choice of Split Screen sub-Picture Sources

IMPORTANT

Split Screen is unavailable if:

•Your only inputs are ANT 1 and ANT 2.

•The main and sub-picture can not both have HDMI inputs

• Either picture source is a 1080p signal from an HMDI jack.

Figure 4. Change the source of the sub-picture with the Split Screen Input Selection menu.