32Chapter 3. TV Operation

Operating Tips

Turning the TV On or Off

To turn the TV on or off, point the remote control at the front of the TV and press the POWER button. Alternatively, press the POWER button on the front panel of the TV.

If You Turn the TV Off by Mistake

1.Press POWER again within about 30 seconds, while the lamp is still hot, to have the TV come back on immedi- ately.

2.When the LAMP indicator starts blinking (about 30 seconds after you shut off power) the TV will ignore the POWER command. The LAMP indicator will continue to blink while the lamp is cooling.

3.Wait about one minute for the LAMP indicator to stop blinking and press POWER to turn the TV on again.

IMPORTANT

For faster power-on, keep the TV’s Energy Mode set to Fast Power On. This setting is in the Setup menu.

Changing Channels

There are several ways to change channels:

Enter the channel number using the number keys on the remote control and press ENTER. For a two-part digital channel, press —/CANCELto enter a separator after the first, second, or third number, depending on the broadcaster’s channel information.

Press CH/to change channels one channel at a time.

Press and hold CH/to move quickly through channels.

Press QV (QuickView) to switch back to the previously tuned channel.

Use the FAV (Favorites) feature to set up lists of favor- ite channels. See “FAV (Channel Menu)” in Chapter 4.

NOTE: Memorize channels to make finding channels easier. See “Setup Menu” in Chapter 4.

Choosing a Program Source

Note: If your only viewing sources are connected to the ANT 1 and ANT 2 antenna jacks, you can switch inputs without the Input Selection menu. Press INPUT to switch between ANT 1 and ANT 2. To verify which is the current source while watching TV, press INFO to see the on-screen status display.

Selecting from Multiple Sources: The Input Selection Menu

The Input Selection menu allows you to select an input to watch on the TV. The current input appears as a gold- colored icon.

1.Press INPUT on the TV’s remote control to display the Input Selection menu (Figure 1).

2.To select a different input, press on the TV’s remote control to move the highlight through icons in the input section menu.

3.Press ENTER to switch to the device and close the menu.

More About the Input Selection Menu

To assign meaningful labels to the icons, such as “VCR” or “DVD,” see the “Input Name Menu” section of Chapter 4.

To rearrange the icons, see the “Icon Order” section of Chapter 4.

Icons will only be shown for devices that are con- nected to TV inputs.

Input Section

Figure 1. Input Selection menu

Controlling Sound Volume

Press VOL/to adjust the sound level.

IMPORTANT

To receive ChannelView updates: Set the Energy Mode to Fast Power On and leave the TV powered off for a while each day. If the TV loses power, program listings will be lost until the next update.

Page 32
Image 32
Mitsubishi Electronics WD-62530 manual Operating Tips, Choosing a Program Source