Electrical installation | Designer Series Gas Fireplaces |
Electronic Pilot Ignition Wiring
WARNING
Do not connect
Figure 39 -
Remote Wall Switch Wiring Diagram
Remote Wall Switch
Position the wall switch. Do not extend beyond the 15 feet of wire.
Optional DC Remote Systems
These instructions replace the section entitled Hearth Mount in the Millivolt hand held remote instruc- tions supplied with the remote.
1.Plug in remote connector wire to remote receiver.
2.Connect the wire terminal from the remote receiver. This replaces the 15' wall switch connection to the switch. Figure 39.
3.Mount remote control receiver at junction box (for your wall switch).
42D0200 | 29 |
