Motorola 68P81083C10-C manual Conventional Functions, Stat Alert MDC-1200/Star Signalling Features

model III	model II
FAILSOFT	FAILSOFT
SOUTH DIVISION

and the current active display.

Conventional Functions

Before transmitting, always make sure that the selected mode is free (Orange LED not on).

Repeater/Direct

Select the menu REPEAT/DIRECT as previously described or press a preprogrammed button. The cur- rent mode (direct or repeater) will be displayed. Use the mode selector (D) to toggle the mode. Press the select button (13) to select the displayed mode of operation.

Monitor

Press the monitor button to toggle monitor on or off. Press and hold the monitor button to enter squelch configuration. Using the mode selector (D), the squelch level of the radio may be fine-tuned. Press the select key when the desired level is attained.

User-Selectable Private Line (PL)

User Selectable Private Line (PL) allows the radio user to select a PL code from a pre-programmed list of codes. Press the Multiple Private Line (MPL) button (if programmed) to view the current PL or press and hold the MPL button to enter MPL configuration. Use the mode selector to change the PL code and press the select key when the desired PL is displayed.

Stat Alert (MDC-1200/Star Signalling) Features

PTT ID and Emergency

Each radio can be programmed to send a unique dig- ital identification code at the beginning of each trans- mission, at the end, or both. When the PTT-ID is programmed to come before voice transmission, you will hear a tone until the ID transmission is complete. This ID may be combined with an emergency alarm that is activated by an emergency button on the radio. The dispatcher can quickly identify the radio user in an emergency situation.

Emergency Operation

Emergency is operated as previously described.

MCS 2000 Models II & III	68P81083C10-C
English	page 13