Motorola 68P81083C10-C manual Secure Operation, Reprogram Request, One Touch Button Functions

English	page 16
MCS 2000 Models II & III	68P81083C10-C

pressing the PTT (F) or pressing and releasing the monitor button (2).

Status/Message

Operated as previously described under “Conven- tional Functions”.

Reprogram Request

If dynamic regrouping is programmed into your radio, the reprogram request function may be selected either via a pre-programmed button or through a menu. A reprogram request will send a message to the console operator requesting that the operator assign the radio to a new talkgroup. See your system administrator for further details.

One Touch Button Functions

If this optional feature is programmed in your radio, a button may be dedicated to sending a pre-pro- grammed status, message, call alert or dialing a pre- programmed phone number. See your system admin- istrator for further details.

Out of Range

If this optional function is programmed into your radio, it will indicate when you have left your radio coverage area. The display will alternate between

model III	model II
OUT OF RANGE	OUT OF RANGE
SOUTH DIVISION

and the current mode and/or the out of range tone will sound.

Secure Operation

Note: This section applies only if secure operation is programmed into your radio. This section lists fea- tures where differences occur when operating in secure. For other feature operation see General Operation above.

Outgoing Calls: When the selected mode is not pre- programmed as either secure-only or clear-only, secure transmit is turned on/off by pressing the secure button (4), except for trunking telephone inter- connect and private call which are always controlled by the button. A beep immediately after the PTT is pressed indicates a clear (non-secure) transmission. Note: If the secure button is pressed during a trans- mission, the transmission is aborted, and an alert tone will sound until the PTT is released. The operation change will be effective with the next PTT press. Incoming Calls: When a secure call is received the orange LED (conventional only) and the secure icon

will flash.