Motorola 68P81083C10-C manual Sending a Telephone Call, Keypad Selection List/Buffered Dialing

English	page 8
MCS 2000 Models II & III	68P81083C10-C

Sending a Telephone Call

List Selection

Press the menu button (9) and operate the mode selector (D) until PHONE is displayed. Press the select button (13) and use the mode selector (D) until the desired name and number is displayed. Press the select button (13) or the PTT (F). The radio then trans- mits the number.

Note: If your radio has been so programmed, you can press the phone button for quick access to the telephone interconnect function. Using the mode selector (D), you can scroll between last dialled call and phone number lists.

Keypad Selection (List/Buffered Dialing)

(model III or model II with optional keypad micro- phone)

Press the phone button (7) or select the menu PHONE as previously described. Enter the desired number directly from the keypad. If you are placing a call to a local extension number requiring a pause before it,

press ✱ # .

If an incorrect phone number is entered, the digits

may be erased using the mode selector (D) to the left/ down. Continue using the mode selector (D) to the left/down to erase the entire number.

When the number is complete, press the select button (13) or the PTT (F) to transmit the call.

model III	model II
PLEASE WAIT	PLEASE WAIT
555-1212

will be in the display, while the system is setting up the call.

Trunking only:

If the PHONE system is busy, the display will show

PHONE BUSY	PHONE BUSY
555-1212

and your call will be placed when the system is availa- ble, unless you press the HOME button (3) or the menu button (9) to quit telephone Interconnect.

If phone access is unavailable to your radio, the dis- play shows

NO PHONE	NO PHONE
555-1212