Motorola 68P81083C10-C manual Selective Calls, Call Alert, Group IDs and Wildcard Entry

English	page 14
MCS 2000 Models II & III	68P81083C10-C

Selective Calls

Receiving a Selective Call

The radio will display

CALL RECEIVED

group ID by entering the selective call or call alert fea- ture and then scroll backward to “group” ID entry with the mode selector (D).

GROUP

ID: 2000

CALL RECEIVED

will be displayed. You may then enter a 3-digit group

for two seconds upon receiving a Selective Call. You can enter Selective Call to view the ID of the calling radio and to respond with a Selective Call (see below).

Sending a Selective Call

Press the call button (12) or select the menu PRIVATE CALL as previously described. Enter the ID via the keypad or use the mode selector (D) to scroll to the ID you wish to call. Press the PTT (F) to transmit the selective call to this ID. If automatic Selective Call is disabled, the radio exits Selective Call after the trans- mission. If automatic Selective Call is enabled, the radio will remain in Selective Call until you exit.

Call Alert

See trunking section for more details.

Group IDs and Wildcard Entry

(Conventional Page and Selective Call)

With keypad and unlimited calling, you may enter a

ID to call or page.

Users can enter a wildcard (*) entry to call or page multiple IDs or groups. The '*' matches all ID digits (0-

9)in that position; i.e. to page all radio IDs 0001 through 0009, enter individual ID 0-0-0-*.

Telephone Interconnect

To make a call through the telephone system in the conventional mode your radio must send access and hang-up codes to the system. The access code can be transmitted in either of two ways, depending on how your radio is programmed.

Immediate: The radio automatically sends a pre-stored access code as soon as the telephone intercon- nect button (7) is pressed.

Delayed: Press the select button (13) or the PTT (F) and the radio sends the pre-stored access code.

After the access code is sent, you should get a dial