Motorola 68P81083C10-C SmartZone/AMSS Functions, Emergency Operation, Site Search & Site Lock

no user actions occur during a pre-programmed length of time. A user action is defined as the press of a button, turn of a knob or the use of any radio acces- sory (e.g. footswitch).

2 minutes prior to automatic power-off, the radio will generate a continuous low tone and

AUTO POWER OFF

will flash on the display. Any user action will immedi- ately cause the radio to cease the automatic power- off tones and display and return the radio to normal operation.

SmartZone/AMSS Functions

In SmartZone and AMSS (Automatic Multiple Site Select) operation the two functions mentioned below may be programmed into your radio:

Site Search & Site Lock

Press the site search/monitor button (2) to show the current site and signal strength.

Additionally a bar display is used to reflect the signal strength level for the current site ranging from 0 to 3 bars:

3 bars indicate a very strong signal and no bar indicates a very weak signal.

Press and hold the site search button (2) to force the radio to scan for a new site.

If the optional “wide-area roaming” function is pro- grammed the radio will automatically switch sites as it moves through your coverage area.

Automatic site switching may be disabled by activat- ing the site lock function.

Please contact the person in charge of your radio sys- tem for further information.

Emergency Operation

If emergency is enabled on your system the function is invoked by pressing the emergency button (5). Emergency is exited by pressing the emergency but- ton for approximately 2 seconds.

Trunking only:

Your radio may be programmed to indicate that an emergency call has been received from another mem- ber of your talkgroup. The display will then alternate between

MCS 2000 Models II & III	68P81083C10-C
English	page 11