CONFIGURATION | SECTION 3 |
|
|
Networking - Routing
You can define up to 20 static routes that specify the Network Destination, Subnet Mask, Gateway, Interface, and Metric. You configure the Network Routing Table here.
RIP (Routing Information Protocol) versions 1 and 2 are routing protocols that are part of the TCP/IP protocol standard. RIP dynamically determines a route based on the smallest hop count between source and destination. To access the screen, click NETWORKING > ROUTING. Click APPLY to save your settings or CANCEL to cancel changes.
Field | Description |
RIPv1 Receive | Enables or disables RIPv1 Receive. |
| The default is disabled. |
RIPv2 Receive | Enables or disables RIPv2 Receive. |
| The default is disabled. |
RIPv1 Transmit | Enables or disables RIPv1 Transmit. |
| The default is disabled. |
SECTION 3, CONFIGURATION |
