Motorola BR700 manual Electrical Connection to Router, Easy Software Setup, Manual Software Setup

SECTION 2 INSTALLATION

Electrical Connection to Router

Your router does not have an On/Off power switch and therefore will only be powered on by plugging in the power adapter:

Reset

Power

LAN

To power

supply

1Connect the power adapter to the router’s Power port, found on the back of the unit.

2Then plug the power adapter into a grounded and surge protected power outlet.

!The Power LED on the front panel lights green when connected properly.

Easy Software Setup

Run the Installation Wizard program from the supplied CD-ROM to quickly setup your network. Once your network is up and running, refer to Section 3:Configuration for advanced configuration.

Manual Software Setup

If you’d prefer to manually setup your network, use this section to configure it. This section details the physical connection of the router to your network as well as the configuration needed by your PC.

To set up your network:

!Physically connect and power on the router

!Configure your PCs

If you don’t want to use the Installation Wizard from the CD-ROM, follow the instructions below. For advanced configurations, refer to Section 3:Configuration.

2-6 SECTION 2, INSTALLATION