Motorola DR 3000 service manual Transmit and Receive Radio Disassembly Detailed

Disassembly/Reassembly Procedures: Transmit and Receive Radio Disassembly — Detailed 5-11

5.7Transmit and Receive Radio Disassembly — Detailed

To remove Transmit and Receive radios from the repeater, refer to Sections 5.6.4 and 5.6.5 accordingly.

5.7.1Transceiver Board and Receiver Board Removal

1.Remove the seven screws from the die cast cover using the T20 TORX™ driver as shown in Figure 5-7.

NOTE: Do not remove the O-rings from the screws.

2. Lift the die cast cover from the chassis.

Screws (7)

Die Cast

Cover

Radio

Chassis

Figure 5-7. Die Cast Cover Removal.

6866576D03-A February 21, 2007