Accessories 10 - 7

Four Slot Ethernet Cradle
This section describes how to set up and use a Four Slot Ethernet cradle with the MC6 5. For cradle communication
setup procedures refer to the MC65 Integrator Guide.
The Four Slot Ethernet cradle:
•
Provides 5.4 VDC power for operating the MC65.
•
Connects the MC65 (up to four) to an Ethernet network.
•
Simultaneously charges up to four MC65 devices.

Charging

Insert the MC65 into a slot to begin charging.
Figure 10-4
MC65 Battery Charging
Battery Charging Indicators
The MC65’s charge LED shows the status of the battery charging in the MC65. See Table 1-1 on page 1-6 for
charging status indications.
The3600 mAh battery fully charges in less than six hours.
Charging Temperature
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). Charging is in telligently controlled by the
MC65.
To accomplish this, for small periods of time, the MC65 alternately enables and disables battery charging t o keep
the battery at acceptable temperatures. The MC65 indicates when charging is disab led due to abnormal
temperatures via its LED. See Table 1-1 on page 1-6.
100
Mbps