C - 10 MC65 User Guide

•
Headset Mode: Connect a Bluetooth headset or a wired headset to automatically switch audio to the
headset.
The MC65 defaults to handset mode. When a wired headset is plugged into the MC65 h eadset connector or a
Bluetooth headset is configured for use with the MC65, the earpiece and speak erphone are muted and audio is
heard through the headset.
Using a Wired Headset
You can use a stereo headset for audio communication when using an audio-enabled application. To use a
headset, plug the headset jack of the Headset Adapter Cable into the headset connector on the side of the MC6 5.
Plug the Headset connector into the connector on the Headset Adapter Cable. Set the MC65’s volume
appropriately before putting the headset on. Plugging a headset into the jack mu tes the speaker.
Using a Bluetooth Headset
You can use a Bluetooth headset for audio communication when using an audio-enabled application. See Chapter
7, Using Bluetooth for information on connecting a Bluetooth headset to the MC65. Set the MC65’s volume
appropriately before putting the headset on. When a Bluetooth headset is conn ected the speakerphone is muted.
Adjusting Audio Volume
Use the Volume Control Slider or the Volume buttons to adjust the volume of the ringer when not in a call and the
audio volume when in a call.
Figure C-12
Phone Volume Slider
To adjust the volume press the Volume Up or Down buttons on the side of the MC65. Move the slider up or down to
adjust the volume.
NOTE While using a Bluetooth headset during a call, the MC65 will not go into suspend mode.
NOTE Remove the headset jack plug before connecting the Headset Adapter to the MC65.
Phone Volume Slider