11 - 10 MC65 User Guide

Four Slot Battery Charger
r
Cables
Table 11-6
Troubleshooting The Four Slot Battery Charger
Symptom Possible Cause Action
Battery not charging. Battery was
removed from the
charger or charger
was unplugged
from AC power too
soon.
Re-insert the battery in the charger or re-connect the charger’s
power supply. The 3600 mAh battery fully charges in less than six
hours.
Battery is faulty. Verify that other batteries charge properly. If so, replace the faulty
battery.
Battery contacts not
connected to
charger.
Verify that the battery is seated in the battery well correctly with the
contacts facing down.
Table 11-7
Troubleshooting the Cables
Symptom Possible Cause Action
MC65 battery is not
charging. MC65 was
disconnected from
AC power too soon.
Connect the power cable correctly. Confirm main battery is
charging under Tap Status Bar > . The 3600 mAh battery fully
charges in less than six hours.
Battery is faulty. Verify that other batteries charge properly. If so, replace the faulty
battery.
The MC65 is not
fully attached to
power.
Detach and re-attach the power cable to the MC65, ensuring it is
firmly connected.
During data
communication, no
data transmits, or
transmitted data was
incomplete.
Cable was
disconnected from
MC65 during
communications.
Re-attach the cable and retransmit.
Incorrect cable
configuration. See the system administrator.
Communication
software is not
installed or
configured properly.
Perform setup as described in the MC65 Integrator Guide.