Accessories 10 - 13

Vehicle Holder

Installation Reminders

Figure 10-9
Vehicle Holder Mounting
•
Do not mount the vehicle holder where it will obscure the driver’s view of the road.
•
Do not mount the vehicle holder near the driver seat air bag deployment area .
•
Do not place the MC65 on top of the dashboard or anywhere without securing it in the vehicle holder.
•
Do not mount the vehicle holder near the passenger seat air bag deployment area.
•
Install the vehicle holder on the surface of your vehicle that is reasonably flat and free of dirt and oil.

Device Mounting Precautions

•
Some countries prohibit the mounting of any electronic device in any location on the vehicle dashboard. Be
sure to check your local laws acceptable mounting areas before in stalling the vehicle holder.
•
The heating and cooling cycle of a vehicle’s interior will in some cases loosen th e adhesion of the suction
cup. Check the vacuum seal of the vehicle mount kit for adequate adhes ion each time you use the unit, and
reinstall if necessary.
•
If the vehicle holder has problems staying on, clean the plastic suction cup with al cohol, then reinstall.

Installation

Install the vehicle mount on the surface of your vehicle that is reasonably flat a nd free of dirt and oil. Clean the
mounting surface with a glass cleaner and a clean cotton cloth. In stall the vehicle mount on the windshield or other
flat car surface using the supplied mounting disc.
WARNING!Some countries prohibit the mounting of any electronic device in any location on the vehicle
dashboard and or windshield. Be sure to check your local laws acceptable mounting areas
before installing the auto mounting kit.