Exit
30=Ringer Volume
The display shows your current ringer volume.
Exit
On
Group/Prvt
Vibe:Off
a djb
Vibrate Off
Exit Vibe
Vibrate:
Phone
a djb
9=Vibrate
Alert:Off Selct
Exit
All
a djb
9=Vibrate
Alert:Off
Setting a Ring Style for the Alternate Line
1. From the Phone Ready screen, press nuntil you see “Line2”.
2. Select “Line2”.
3. Repeat the procedure for "Setting an Alert Tone Style", above.
www.mot.com/iDEN
2. Press the Volume Control buttons on the side of the phone to listen as you raise or lower the volume. At the lowest setting, the screen displays “Ringer Vol- ume Silent”.
3. When you reach the desired level, select “Exit”.
Setting the Ringer Volume
You can adjust the ringer volume for incoming calls. If you have a second phone line, you must set each line separately. Be sure to select the desired line before setting the volume.
1. Press *, #, 3, 0. The “30=Ringer Volume”
screen displays.a djb
5. To view other choices, press r.
• To receive vibration alerts only for Mail, select a djb “Mail Vibe”, then select “On”.
• To receive vibration alerts for Group and Private calls, select “Group/Prvt”, then select “On”.
6. Select “Exit” to return to the Vibrate Alert menu.
7. Select “Exit” again to return to the previous mode.
3. Select “Selct”. The first choice is Phone Vibrate.
4. To view the Vibe/Ring vibration alert choices, press non the keypad.
Selecting VibraCall Alert for Individual Services
To set a vibration alert for specific phone or mail services: 1. Press *,#,9.
2. Press nuntil you see the “Selct” menu option.
16
