Motorola r750plus manual Remote Speaker/Microphone, Attaching and Removing the Swivel Clip

Optional Accessories

Remote Speaker/Microphone

The FLN2800A Remote Speaker/Microphone (RSM) provides a convenient means of communicating by having a speaker, a microphone, and a Push-to- Talk (PTT) button in a single, hand-held or clip-on accessory. The RSM also includes a 3.5 mm audio jack (located on the opposite side of the PTT) to accept secondary receiver audio accessories.

PTT Button 3.5mm Audio Jack

Speaker /

MicrophoneAccessory

Connector

Attaching and Removing the Swivel Clip

To attach the swivel clip to the remote speaker/ microphone:

1.Position the clip with the release tab pointing upward and align the metal plate edges of the swivel clip with the plastic slots on the RSM’s rear housing.

2. While holding the clip open, slide the metal plate

in and push down firmly until the parts snap together.

To remove the swivel clip from the remote speaker/ microphone:

1. Carefully push the flat blade of a #2 slotted screw- driver (or similar instrument) between the RSM’s housing and the swivel clip’s metal release tab, as shown in the figure.

2.While performing step 1, push the swivel clip toward the top of the RSM.

3.As the release tab disengages, remove the screwdriver and pull the swivel clip completely away from the unit.

Connecting the Remote Speaker/Microphone to the Portable

To attach the accessory connector, position the portable so that it faces you.

65