Making Group Calls
A Group Call allows you to communicate instantly with members of a selected
Talkgroups appear on your display as numbers or programmed names, such as Talkgrp10 or Sales Team.
To make a Group Call:
1.Press muntil “Group Ready” displays. Your most
recently used talkgroup displays, for example, “Talkgrp 10”.
2. To place a call, do one of the following:
• To speak to this talkgroup, press and hold the S Off Sts PTT button. Wait for the chirp, then speak into
the microphone.
•To speak to another talkgroup, press lor runtil you see the desired talkgroup name. Press and hold the PTT button. Wait for the chirp, then speak into the microphone.
3.To listen, release the PTT button.
Receiving a Group Call
When you receive an incoming Group call, you will hear a brief
1.Your phone must be idle, that is, not busy in an active call or on the browser.
2.Wait for the caller to finish speaking, then press and hold the PTT button. Begin speaking after you hear the chirp.
3.To listen, release the PTT button.
You can receive group calls only in the Talkgroups that you are provisioned for. For more information, see “Adding or Storing a Talkgroup” on Page 32.
Adding and Storing a Talkgroup
To add and store a talkgroup name to your r750plus phone:
1.Press *,#,2,3.
2.Select “Ok”.
3.At “Add New Entry?”, select “Ok”.
4.At “Enter ID”, enter the desired talkgroup number and select “Store”.
5.At “Enter Name”, enter a name for the talkgroup and select “Store”.
www.mot.com/iDEN
32
