Advanced Features

Some r750plus phones are provided with an advanced feature set as described in this section. Please contact your service provider for more information.

Multi-Simultaneous Talk Group Scan

Multi-Simultaneous Talkgroup Scan (Scan) allows users within a fleet to monitor more than one talkgroup. A Talkgroup Mode, within the range of 1- 255, is comprised of up to four talkgroups (one Primary Talkgroup and up to three Secondary Talkgroups). Calls can only be initiated on the user’s Primary Talkgroup; however, a user can respond to an active call on either a Primary or Secondary Talkgroup. Both Primary and Secondary Talkgroups, as well as the Talkgroup Mode, can be named (aliased). The Scan feature is set to “ON”, but the user has the capability of disabling Scan through an option key. The unit will store the last Scan setting, and power on with that setting.

Entering Group Mode

1.Press the fkey to power on your unit. Press mto enter Group Mode.

Two different Talkgroup Modes are displayed below. The Primary Talkgroup is indicated to the right of the Talkgroup Mode. The display on the left shows a non-aliased Primary Talkgroup, and the display on the right shows an aliased Primary Talkgroup.

a

b

a

b

Group Ready

Group Ready

102:Tg 15

 

3:Electricia

S Off

Sts

S Off

Sts

Primary Talkgroup

Primary Talkgroup

Not Aliased

Aliased

 

www.mot.com/iDEN

34

Page 42
Image 42
Motorola r750plus manual Advanced Features, Multi-Simultaneous Talk Group Scan, Entering Group Mode