Advanced Features

You can also send any numeric Status Message from 1-255. A Status Message can be sent by selecting both the Status Message and target ID (alias) of the person who is to receive the Status Message. You can reduce talk time by sending Status Messages. You can also leave a Status Message for receivers while they are away from their portables.

Entering the Status Message Function

1.Press the Status Option Key to get to the Status Message function. You must be in Group or Private Mode to access this function.

The second line of the display shows the Status Mes- sage (alpha or numeric) of the last successfully sent status.

2.Press Option “Exit” to return to either the group or Private mode. Press Option “Targt” to go to the Target ID selection screen.

a b

Sts Message

En Route

Exit Targt

Selecting a Status Message with Direct Entry

Direct Entry allows you to use the keypad to select the message you want to send. Enter any number from 1-255 to select a Status Message. The number can correspond to one of ten pre-programmed alphanumeric status messages or any other numeric Status Message within the range of 1-255.

1.Press 2.

2.

Press “Ok”. Pressing the PTT button at this time

a

b

 

will send the message to the last unit to which you

Sts Message

 

sent a successful message.

2= At Lunch

 

 

 

3.

Press “Targt” to select a target for this message.

Cancl

Ok

39

Page 47
Image 47
Motorola r750plus manual Entering the Status Message Function, Selecting a Status Message with Direct Entry