2 - 6 VC5090 Vehicle Computer Product Reference Guide

Important Fixing Information

• Mounting surface must be flat and stiff and it must extend evenly for the entire length of the mounting bracket
surface.
• All four mounting holes must be used.
• All nuts and bolts must be checked periodically and tightened if required.
• When installing the vehicle computer, care must be taken to ensure that the mounting bracket footprint is fully
supported. Additional plates may be required to achieve this.
• Do not mount the vehicle computer with the mounting bracket perpendicular to a wall as shown in Figure 2-6.
Figure 2-6
Incorrect Mounting

Mounting onto an Over-Head Cross-Beam Example

The diagram below illustrates a typical installation where the vehicle computer is mounted onto a cross-beam.
CAUTION Any modification to supplied mounting bracket could cause failure of the unit and/or mountings.