2 - 22 VC5090 Vehicle Computer Product Reference Guide

4. Double-tap the SerialWedge icon on the desktop to launch the application.
5. Tap the SerialWedge icon in the task tray.
6. Select Configuration > Port Selection from the pop-up menu. The Port Selection window appears.
Figure 2-26
Port Selection Window
7. Select the COM port radio button to match the COM port that you connected the scanner cable to (COM1 or
COM2).
8. Tap OK.
9. Verify that the scanner is connected properly. See Verifying the Scanner is Working Properly on page 2-31.
Connecting an DS/LS3408 USB Scanner
To connect a DS3408 or LS3408 USB scanner to the VC5090:
1. Connect the appropriate USB scanner cable to the scanner.
2. Connect the USB scanner cable to the USB/Keyboard connector.
NOTE Refer to the scanner Product Reference Guide for information on configuring the scanner.
The USB scanner cable connects to the USB/Keyboard connector. If the optional keyboard is used on the
VC5090 Full-screen configuration, you are not allowed to connect a USB scanner on the rugged USB port.
Connecting a USB scanner to the USB A port is not recommended.