2 - 26 VC5090 Vehicle Computer Product Reference Guide

7. Double-tap the SerialWedge icon on the desktop to launch the application.
8. Tap the SerialWedge icon in the task tray.
9. Select Configuration > Port Selection from the pop-up menu. The Port Selection window appears.
Figure 2-36
Port Selection Window
10. Select the COM6 (USB port) radio button.
11. Tap OK.
12. Verify that the scanner is connected properly. See Verifying the Scanner is Working Properly on page 2-31.
Connecting an LS3578 Bluetooth Scanner
To connect an LS3578 Bluetooth scanner to the VC5090:
1. Ensure that the scanner battery is fully changed.
2. Scan the Set All Defaults bar code.
Figure 2-37
Set All Defaults Bar Code
3. Scan the HID Profile (Slave) bar code.
Figure 2-38
HID Profile (Slave) Bar Code
4. Tap > Enable Bluetooth. The Bluetooth icon changes to indicate that Bluetooth is enabled.
Figure 2-39
Enable Bluetooth
NOTE Refer to the scanner Product Reference Guide for information on configuring the scanner.