Moxa Technologies CA-132/132I user manual Overview, Package Checklist, Product Features

Models: CA-132/132I

1 49
Download 49 pages 45.38 Kb
Page 6
Image 6
Overview

Overview

CA-132/132I is a PC/104 module that supports the RS-422/485 serial interfaces, and can be used with PC/104 CPU modules or CPU cards that accept PC/104 expansion modules. CA-132/132I has two independent serial interfaces, which are accessed through RJ45 connectors. You can configure both ports for the RS-422 or RS-485 interfaces by DIP switch. The module’s industry-standard MOXA UART (16C550 compatible) is fully programmable. Moxa has implemented its patented ADDC™ technology for RS-485 automatic direction control, so there is no need to change jumpers to switch the module between driver and receiver. The built-in 16 KV ESD surge protection protects other devices connected to the RS-485 network.

Package Checklist

MOXA CA-132/132I products are shipped with the following items:

!1 MOXA CA-132/132I 2-port serial board

!CA-132/132I Document & Software CD

!CA-132/132I Quick Installation Guide

NOTE: Notify your sales representative if any of the above items is missing or damaged.

Product Features

CA-132/132I Series products enjoy the following features:

!2 RS-422/485 ports

!RS-422/485 communication distance up to 4000 feet (1.2 km)

!High speed data transmission rate up to 230.4 Kbps

!Switch selectable for I/O and INT Vector addresses (from Hex 000 to 3FF)

!64-byte FIFOs

!IRQ settings are selectable by jumper

!Built-in 16 KV ESD surge protection for TX and RX lines

!4 LED indicators onboard (red for TX, and green for RX)

!Support 4-wire RS-422 and 2/4-wire RS-485

!ADDC™ for RS-485 transmission

!CA-132I has 2 KV isolation protection

Product Specifications

CA-132/132I Series boards have the following specifications:

!Dimensions: 9.6 cm × 9.0 cm

!Bus: PC/104

!Baud rate: 50 to 230.4 Kbps

!Character length: 5, 6, 7, or 8 bits

!Parity: even, odd, none, mark, and space

!Stop bit: 1, 1.5 or 2

!I/O connectors: dual 8-pin RJ-45 connectors

!Interrupt levels: IRQ 3, 4, 5, 6, 7, 9, 10, 11, 12 or 15

!Clock input: 14.745 MHz

!Power consumption (+5 V): CA-132/210 mA, CA-132I/455 mA

!MTBF: 100,000 hrs @ 25environment

!Operating temperature: 0 to 55

1-2 CA-132/132I User’s Manual

Page 6
Image 6
Moxa Technologies CA-132/132I user manual Overview, Package Checklist, Product Features, Product Specifications