ENGINE WILL NOT START
C A U S E
Empty petrol tank
Primer bulb wasn't pressed enough Engine flooded
Old or improperly mixed petrol Fouled spark plug
A C T I O N
Fill petrol tank
Press primer bulb fully and slowly 10 times
Use starting procedure with choke lever in the RUN position
Drain petrol tank / Add fresh petrol mixture Replace or clean the spark plug
ENGINE WILL NOT IDLE
C A U S E | A C T I O N |
Air filter is plugged | Replace or clean the air filter |
Old or improperly mixed petrol | Drain petrol tank / Add fresh petrol mixture |
Improper carburettor adjustment | Take to an authorized service dealer for |
| carburettor adjustment |
|
|
ENGINE WILL NOT ACCELERATE |
|
|
|
C A U S E
Old or improperly mixed petrol Improper carburettor adjustment
A C T I O N
Drain petrol tank / Add fresh petrol mixture
Take to an authorized service dealer for carburettor adjustment
ENGINE LACKS POWER OR STALLS WHEN UNDER LOAD
C A U S E
Old or improperly mixed petrol Improper carburettor adjustment
A C T I O N
Drain petrol tank / Add fresh petrol mixture
Take to an authorized service dealer for carburettor adjustment
UNIT WILL NOT BLOW OR VACUUM
C A U S E | A C T I O N |
Bag is full | Empty Bag. See Empty the Vacuum Bag |
Blocked tube | Clear Blockage. See Clearing a Blocked |
| tube/Impeller |
Blocked impeller | Clear Blockage. See Clearing a Blocked |
| tube/Impeller |
Damaged impeller | Take unit to an authorized service dealer |
|
|
GB13