RULES FOR SAFE OPERATION

KNOW YOUR UNIT

APPLICATION

As a blower

•Cleaning of yards, garages, driveways, porches, patios, around walls, fences, etc.

As a vacuum

• Picking up leaves, light debris, etc.

Blower/Vacuum Tube

Blower/Vacuum Inlet

Blower Outlet

Vacuum Bag Hook

Blower/Vacuum Mode

Change-Over Lever

Choke Lever

Primer

Throttle

Lever

Petrol Cap

Ignition Switch

Starter Rope

Grip

Harness

Spark Plug

Vacuum Bag

Air filter/muffler cover

Vacuum Bag Zipper

ASSEMBLY INSTRUCTIONS

ATTACHING AND REMOVING THE BLOWER/ VACUUM TUBE

Attaching

NOTE: The blower/vacuum tube comes unassembled on this unit. Installation is required to provide safe and easy use for the operator.

1.Remove the screws and nuts provided from the hardware pack.

2.Insert the blower/vacuum tube all the way into the opening on the motor housing until the holes in the tabs on the blower/vacuum tube align with the screw holes in the housing (Fig. 1).

3.Insert the 2 (two) 8-32 x 3/4” slotted T20 Torx screws into the right side of the motor housing and the 2 (two) nuts into the left side of the motor housing (Fig. 2).

4.Tighten the screws firmly. Do not over-tighten.

5.Install the 2 (two) remaining self-tapping 8-16 x 3/4” slotted T20 Torx screws into the holes on either side of the housing (Fig. 2). Tighten until snug, do not over-tighten.

GB5