The Bus-Tech PCI ESCON Adapter should be included in the list.

Selecting the Bus-Tech adapter and clicking Properties will bring up the ESCON Configuration Screen (Figure 4-6).

Figure 4-6. Bus-Tech’s ESCON Configuration Screen

To configure a new device click Add…

Figure 4-7. Add Device Dialog

Complete the Channel Link Address, LPAR, CUAdd, Base Device Address and Emulation Type fields in the Add ESCON Devices dialog (Figure 4-7) according to the descriptions of these fields found on pages 16-17 of this chapter. If your mainframe is configured with ESCON Multiple Image Facility (EMIF) and this CHPID is defined on the mainframe as shared, then check the CHPID is shared check box. Enter the number of devices you wish to define. For example, to create

20 PCI ESCON Adapter Installation Guide

Page 26
Image 26
Multi-Tech Systems 40-01459-D0-001 manual To configure a new device click Add…