Multi-Tech Systems 40-01459-D0-001 manual Windows NT, Network Icon on Control Panel

Windows NT

The PBSA network driver is always required in order to allow Windows NT to communicate with the adapter. The driver must be installed once for each PCI ESCON Adapter installed in the system. The following step-by-step procedure will install the driver into your Windows NT Server.

Step

1. From the Windows NT Server Control Panel, open Network (Figure 3-5).

Figure 3-5. Network ICON on Control Panel

2.From the Adapters tab on the Network screen, click on the Add button (Figure 3-6).

10 PCI ESCON Adapter Installation Guide