105
Appendix
:
At end of dial Continuous Redial
command Colon; causes continuous redial of number until answered (10 in North American
models). Not used in U.K. or International models.
;
At end of dial Return to Command Mode After Dialing
command Semi-colon; causes immediate return to command mode after dialing.
!
In dial Flash On-Hook
command Exclamation; causes modem to flash on-hook.
@
In dial Quiet Answer
command Causes modem to wait for a ringback, then 5 seconds of silence before processing
next part of command.
$
In dial Call Card Tone Detect
command Causes modem to wait for a call card tone before processing next part of command.
+++AT<CR>
Escape Sequence
Puts modem in command mode while still remaining on line. Type +++ followed by the
letters A and T, up to ten command characters (or as defined by
S34
), and a
RETURN.
<BREAK>AT<CR>
Break Escape Sequence
Alternate escape method. Puts modem in command mode while still remaining on line.
Enter break signal followed by the letters A and T, up to sixty command characters,
and a RETURN.
%%%AT<CR>
Remote Configuration Escape Sequence
Cause remote modem to display remote configuration menu. Type %%% (or as
defined in register S13) followed by the letters A and T, and a RETURN.