Chapter 1 - Introduction
1.6Technical Specifications
Model Number | MT2834MR6 |
|
Data Rates (Modem) | Six independent modems (Modem A, B, C, D, E, F), each operating at 33,600, | |
| 31,200, 28,800, 26,400, 24,000, 21,600, 19,200, 16,800, 14,400, 12,000, 9600, | |
| 4800, 2400, 1200, or | |
Data Rates (Fax) | 14,400, 9600, 4800, and 2400 bps | |
Data Format (Modem) | Serial, binary, asynchronous at all data rates | |
Configuration | Each of the card’s six modems is independently configurable | |
Compatibility (Modem) | ||
| V.22bis, V.22, V.23, V.17, Bell 212A* and 103/113* | |
Compatibility (Fax) | ||
Error Correction | ||
Data Compression | ||
Speed Conversion | Serial port data rates adjustable to 300, 1200, 2400, 4800,9600, 19,200, 38,400, | |
| 57,600, and 115,200 bps |
|
Flow Control | XON/XOFF, CTS/RTS, ENQ/ACK | |
Mode of Operation | Half or full duplex over | |
| manual answer |
|
Intelligent Features | Fully AT command compatible; autodial; redial; repeat dial*; dial linking*; pulse or | |
| tone dial; dial pauses; call status display; | |
| ||
| modem parameters, stored telephone numbers, and help menus; and remote | |
| configuration. |
|
AT Commands | 100% compatible with standard AT command set | |
Command Buffer | 60 characters |
|
Automatic Dialing | Standard AT command asynchronous dialing | |
Modem Modulations | FSK at 300 bps, PSK at 1200 bps, QAM at 2400, 4800, and 9600 bps | |
| QAM with | |
| 21,600, 24,000, 26,400, 28,800, 31,200, and 33,600 bps | |
Fax Modulations | V.21 CH2 FSK at 300 bps |
|
| V.27ter DPSK at 4800 and 2400 bps | |
| V.29 QAM at 9600 and 7200 bps | |
| V.17TCM at 14400, 12000, 9600, and 7200 bps | |
Carrier Frequencies | 1600, 1646, 1680, 1800, 1829, 1867, 1920, | |
1959, 2000 Hz |
| |
Carrier Frequencies: | 1800 Hz |
|
AT&T V.32 terbo/ |
|
|
|
| |
Carrier Frequencies: | Transmit originate: | 1200 Hz |
V.22bis/V.22 or | Transmit answer: | 2400 Hz |
Bell 212A Standard | Receive originate: | 2400 Hz |
(2400 & 1200 bps) | Receive answer: | 1200 Hz |
12