MultiMobile User Guide
Result Codes
In command mode your modem can send responses called result codes to your computer. Result codes are used by communications programs and can also appear on your monitor.
Terse | Verbose | Description |
0 | OK | Command executed |
1 | CONNECT | Modem connected to line |
2 | RING | Ring signal detected |
3 | NO CARRIER | Carrier signal lost or not detected |
4 | ERROR | Invalid command |
5 * | CONNECT 1200 | Connected at 1200 bps |
6 | NO DIALTONE | No dial tone detected |
7 | BUSY | Busy signal detected |
8 | NO ANSWER | No answer at remote end |
10* | CONNECT 2400 | Connected at 2400 bps |
11* | CONNECT 4800 | Connected at 4800 bps |
12* | CONNECT 9600 | Connected at 9600 bps |
13* | CONNECT 14400 | Connected at 14400 bps |
14* | CONNECT 19200 | Connected at 19200 bps |
24* | CONNECT 7200 | Connected at 7200 bps |
25* | CONNECT 12000 | Connected at 12000 bps |
26* | CONNECT 16800 | Connected at 16800 bps |
40* | CONNECT 300 | Connected at 300 bps |
55* | CONNECT 21600 | Connected at 21600 bps |
56* | CONNECT 24000 | Connected at 24000 bps |
57* | CONNECT 26400 | Connected at 26400 bps |
58* | CONNECT 28800 | Connected at 28800 bps |
59* | CONNECT 31200 | Connected at 31200 bps |
60* | CONNECT 33600 | Connected at 33600 bps |
70* | CONNECT 32000 | Connected at 32000 bps, 56K rate |
71* | CONNECT 34000 | Connected at 34000 bps, 56K rate |
72* | CONNECT 36000 | Connected at 36000 bps, 56K rate |
73* | CONNECT 38000 | Connected at 38000 bps, 56K rate |
74* | CONNECT 40000 | Connected at 40000 bps, 56K rate |
75* | CONNECT 42000 | Connected at 42000 bps, 56K rate |
76* | CONNECT 44000 | Connected at 44000 bps, 56K rate |
77* | CONNECT 46000 | Connected at 46000 bps, 56K rate |
78* | CONNECT 48000 | Connected at 48000 bps, 56K rate |
79* | CONNECT 50000 | Connected at 50000 bps, 56K rate |
80* | CONNECT 52000 | Connected at 52000 bps, 56K rate |
81* | CONNECT 54000 | Connected at 54000 bps, 56K rate |
82* | CONNECT 56000 | Connected at 56000 bps, 56K rate |
88 | DELAYED | Delay is in effect for the dialed number |
89 | BLACKLISTED | Dialed number is blacklisted |
90 | BLACKLIST FULL | Blacklist is full |
100 | CONNECT 28000 | Connected at 28000 bps, V.90 rate |
101 | CONNECT 29333 | Connected at 29333 bps, V.90 rate |
102 | CONNECT 30666 | Connected at 30666 bps, V.90 rate |
103 | CONNECT 33333 | Connected at 33333 bps, V.90 rate |
104 | CONNECT 34666 | Connected at 34666 bps, V.90 rate |
105 | CONNECT 37333 | Connected at 37333 bps, V.90 rate |
106 | CONNECT 38666 | Connected at 38666 bps, V.90 rate |
107 | CONNECT 41333 | Connected at 41333 bps, V.90 rate |
108 | CONNECT 42666 | Connected at 42666 bps, V.90 rate |
109 | CONNECT 45333 | Connected at 45333 bps, V.90 rate |
110 | CONNECT 46666 | Connected at 46666 bps, V.90 rate |
111 | CONNECT 49333 | Connected at 49333 bps, V.90 rate |
112 | CONNECT 50666 | Connected at 50666 bps, V.90 rate |
113 | CONNECT 53333 | Connected at 53333 bps, V.90 rate |
114 | CONNECT 54666 | Connected at 54666 bps, V.90 rate |
*EC is added to these result codes when the extended result codes configuration option is enabled. EC is replaced by one of the following codes, depending on the type of error control connection:
V42bis
V42
MNP5
MNP4
NoEC
40 | MT5634ZLX/E |