Chapter 2 - Quick Start
Windows NT 3.51 Installation
Getting Started with Windows NT3.51
1.Run Windows NT 3.51.
2.Login with a full access level (i.e., ADMINISTRATOR).
3.Remove all existing network support
a. open Program Manager Main group Control Panel Network
b. remove all existing network components
Note: Remove all adapters first, then servers, then workstations, etc.
Add PCMCIA to Your Laptop
1.Open Program Manager Main group Control Panel Devices.
2.Select PCMCIA.
3.Click Startup.
4.Select Boot, then click OK.
5.When all PCMCIA adapters are added, click Close and restart Windows NT.
Check Event Viewer after your system reboots. Ask your laptop dealer for help if any problems occur.
MT5634ZLX/E Installation in NT 3.51
1.Insert the MT5634ZLX/E card into an open PCMCIA slot.
2.Run Windows NT.
3.Login with full access (i.e., ADMINISTRATOR).
4.Open Program Manager Main group Control Panel Network.
5.Click YES to install network components.
6.Enter the correct path for NT installation media
7.Click “Do not detect for the network adapter”.
8.Open the Network Adapter Card selection box.
9.Select <OTHER> REQUIRES DISK FROM MANUFACTURER .
10.Click Continue.
11.Insert the driver disk into floppy disk drive, then enter the correct path (A:\).
12.Select the MT5634ZLX/E, then click OK.
13.A dialog box is displayed for the driver settings change.
14.Give appropriate system resources to the MT5634ZLX/E (the settings must be unique for this device). Recommended resources:
·I/O Base Address: 300. Alternative: 220, 320, 340
·Interrupt (IRQ): IRQ 5. If your laptop has multimedia
devices, a higher interrupt (e.g., IRQ:11) is needed. · Base Memory: D000. Possible alternative: D800
MT5634ZLX/E | 25 |