DCA85USJ2 60 HZ GENERATOR • OPERATION AND PARTS MANUAL — REV. #1 (03/22/11) — PAGE 19
DIAGNOSTIC DISPLAY
First Time Start Up
1. When power is fi rst applied to the diagnostic display,
the “Logo” is displayed.
2. The “Wait to Start” message will be displayed for
engines with a pre-startup sequence. Once the “Wait
to Start” message is no longer displayed the operator
may start the engine. Note: Displays only when SAE
J1939 message is supported by engine manufacture.
3. Once the engine has started the single engine
parameter is displayed.
Main Menu Navigation
1. Starting at the single or four engine parameter display,
touch “Menu”.
WAITTO
START
PREHEAT
COOL
1800 RPM
01500 3000
TEMP
ENGRPM
COOL
1800 RPM
01500 3000
TEMP
ENGRPM
98%
14.2 57PSI
1000RPM
LOADRPM
BATTVOLT
ENGRPM
OILPRES
2. The first seven items of the “Main Menu” will be
displayed. Touching the “Arrow Buttons” will scroll
through the menu selection.
3. Touching the right arrow button will scroll down to reveal
the last items of “Main Menu” screen highlighting the
next item down.
4. Touch the Arrows” to scroll to the desired menu item
or touch “Menu” to exit the Main menu and return to
the engine parameter display.
Selecting a Language
1. Starting at the main menu display use the “Arrows to
scroll to the “Language” menu and once highlighted
touch the “Enter” button.
GOTO 1-UP DISPLAY
LANGUAGES
STOREDCODES
ENGINECONF
SETUP1-UP DISPLAY
SETUP-4-UPDISPLAY
SELECTUNITS
G
ADJUSTBACKLIGHT
ADJUSTCONTRAST
UTILITIES
COOL
1800 RPM
01500 3000
TEMP
ENGRPM
98%
14.2 57PSI
1000RPM
LOADRPM
BATTVOLT
ENGRPM
OILPRES
GOTO 1-UP DISPLAY
G
STOREDCODES
ENGINECONF
SETUP1-UP DISPLAY
SETUP-4-UPDISPLAY
SELECTUNITS
LANGUAGES