DIAGNOSTIC DISPLAY
2.The language choices will be displayed. Use the “Arrow” buttons to scroll through the selections and touch “Enter” to make a selection.
ENGLISH
ESPANOL
FRANCAIS
DEUTSCH
3.Now that you have selected the language, touch the “Menu” button to return to the main menu display.
Stored Fault Codes
1.Starting at the single or the four engine parameter display touch the “Menu button”.
|
|
|
|
|
| 98% | 1000 RPM | ||
|
|
|
|
|
| ||||
0 | 1500 | 3000 | LOAD RPM | ENG RPM | |||||
| 1800 RPM |
|
|
|
| ||||
|
|
|
|
| |||||
|
|
|
|
|
| 14.2 | 57 PSI | ||
ENG RPM | COOL TEMP | BATT VOLT | OIL PRES | ||||||
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
4.f the word “MORE” appears above the “Arrow Buttons” there are more stored fault codes that may be viewed. Use the “Arrow Buttons” to scroll to the next Stored Diagnostic Code.).
1 of x
SPN110 FMI10
HIGH COOLANT TEMP
MORE
HIDE
5. Touch the “Menu Button to return to the main menu.
1 of x
SPN110 FMI10
HIGH COOLANT TEMP
MORE
HIDE
2.The main menu will pop up on the display. Use the “Arrow Buttons” to scroll through the menu until the Stored Fault Codes is highlighted.
GO TO
STORED CODES
ENGINE CONFG
SETUP
SELECT UNITS
ADJUST BACKLIGHT
6.Touch the “Menu Button” to exit the Main menu and return to the engine parameter display.
|
|
|
|
|
| |
GO TO | 98% | 1000 RPM | ||||
STORED CODES | ||||||
| LOAD RPM | ENG RPM | ||||
ENGINE CONFG |
|
|
|
|
| |
SETUP |
|
|
|
|
| |
|
|
|
|
| ||
|
|
|
|
| ||
SELECT UNITS | 14.2 | 57 PSI | ||||
| BATT VOLT | OIL PRES | ||||
ADJUST BACKLIGHT |
| |||||
|
|
|
|
| ||
|
|
|
|
|
| |
3.Once the “Stored Fault Codes” menu item has been highlighted touch the “Enter Button” to view the “Stored Fault Codes” (when applicable, consult engine or transmission manufacturer for SAE J1939 supported parameters
GO TO
STORED CODES
ENGINE CONFG
SETUP
SELECT UNITS
ADJUST BACKLIGHT
Engine Confi guration Data
1.Starting at the single or four engine parameter display touch the “Menu Button”.
|
|
|
|
|
| 98% | 1000 RPM | ||
|
|
|
|
|
| ||||
0 | 1500 | 3000 | LOAD RPM | ENG RPM | |||||
| 1800 RPM |
|
|
|
| ||||
|
|
|
|
| |||||
|
|
|
|
|
| 14.2 | 57 PSI | ||
ENG RPM | COOL TEMP | BATT VOLT | OIL PRES | ||||||
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
PAGE 22 — DCA85USJ2 60 HZ GENERATOR • OPERATION AND PARTS MANUAL — REV. #1 (03/22/11)
