DIAGNOSTIC DISPLAY
Shutdown Codes
1.During normal operation the single or four parameter screen will be displayed
|
|
|
|
|
| 98% | 1000 RPM | ||
|
|
|
|
|
| ||||
0 |
|
|
| 3000 | LOAD RPM | ENG RPM | |||
1500 | |||||||||
| 1800 RPM |
|
|
|
| ||||
|
|
|
|
| |||||
|
|
|
|
|
| 14.2 | 57 PSI | ||
ENG RPM | COOL TEMP | BATT VOLT | OIL PRES | ||||||
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
5.Touching the “Enter Button” once again will hide the fault and return the screen to the single or four parameter display.
1 of x SHUTDOWN
SPN110 FMI10
HIGH COOLANT TEMP
MORE
HIDE
2.When the diagnostic display receives a severe fault code from an engine control unit the single or four parameter screen will be replaced with the “Shutdown” message.
1 of x SHUTDOWN
SPN110 FMI10
HIGH COOLANT TEMP
MORE
HIDE
6.The Single or Four parameter screen will display the fault icon until the fault condition is corrected. NOTE: Ignoring active fault codes could result in severe engine damage.
|
|
|
|
| ! | 98% |
| 1000 RPM |
| ||
|
|
|
|
|
| ||||||
0 | 1500 | 3000 | LOAD RPM |
| ENG RPM |
| |||||
| 1800 RPM |
|
| ! |
|
| |||||
|
|
|
|
| |||||||
|
|
|
|
|
| 14.2 |
| 57 PSI |
| ||
ENG RPM | COOL TEMP! | BATT VOLT |
| OIL PRES | ! | ||||||
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
3.To acknowledge and “Hide” the fault and return to the single or four parameter display touch the “Enter Button
”
1 of x SHUTDOWN
SPN110 FMI10
HIGH COOLANT TEMP
MORE
HIDE
Bachlight Adjustment
1.Starting at the single or four engine parameter display touch the “Menu Button”.
|
|
|
|
| ! | 98% |
| 1000 RPM | ||
|
|
|
|
| ||||||
0 | 1500 | 3000 | LOAD RPM |
| ENG RPM | |||||
| 1800 RPM |
|
| ! |
| |||||
|
|
|
| |||||||
|
|
|
|
|
| 14.2 |
| 57 PSI | ||
ENG RPM | COOL TEMP! | BATT VOLT |
| OIL PRES | ||||||
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
4. . The display will return to the single or four parameter display, but the display will contain the “Shut Down” icon. Touching the “Enter Button” will redisplay the hidden fault.
|
|
|
|
| ! | 98% |
| 1000 RPM | |||
|
|
|
|
|
| ||||||
0 | 1500 | 3000 |
| ||||||||
| 1800 RPM | LOAD RPM |
| ENG RPM | |||||||
|
|
| ! |
| |||||||
|
|
|
| ||||||||
|
| COOL TEMP! | 14.2 |
| 57 PSI | ||||||
ENG RPM | |||||||||||
BATT VOLT |
| OIL PRES | |||||||||
|
|
|
|
|
|
|
|
|
|
| |
2.The main menu will pop up on the display. Use the “Arrow Buttons” to scroll through the menu until the “Adjust Backlight” is highlighted.
GO TO
STORED CODES
ENGINE CONFG
SETUP
SELECT UNITS
ADJUST BACKLIGHT
DCA85USJ2 60 HZ GENERATOR • OPERATION AND PARTS MANUAL — REV. #1 (03/22/11) — PAGE 25
