DIAGNOSTIC DISPLAY
3.Once the “Adjust Backlight” menu item has been highlighted touch the “Enter Button” to activate the “Adjust Backlight” function
GO TO
STORED CODES
ENGINE CONFG
SETUP
SELECT UNITS
ADJUST BACKLIGHT
4.Use the “Arrow Buttons” to select the desired backlight intensity..
ADJUST BACKLIGHT
CONTRAST ADJUSTMENT
1.Starting at the single or four engine parameter display, touch the “Menu Button”.
|
|
|
| 98% | 1000 RPM |
|
|
|
| ||
|
|
|
| ||
0 |
|
| 3000 | LOAD RPM | ENG RPM |
1500 | |||||
|
|
|
|
|
|
1800 RPM
|
| 14.2 | 57 PSI |
ENG RPM | COOL TEMP | BATT VOLT | OIL PRES |
|
| ||
|
|
|
|
2.The main menu will pop up on the display. Use the “Arrow Buttons” to scroll through the menu until “Adjust Contrast” is highlighted.
GO TO
STORED CODES
ENGINE CONFG
SETUP
SELECT UNITS
ADJUST BACKLIGHT
5. Touch the “Menu Button” to return to the main menu.
ADJUST BACKLIGHT
6.Touch the “Menu Button” to exit the Main menu and return to the engine parameter display
|
|
|
| 1000 RPM | ||
GO TO | 98% | |||||
STORED CODES |
| LOAD RPM | ENG RPM | |||
ENGINE CONFG |
|
|
|
|
| |
SETUP |
|
|
|
|
| |
14.2 | 57 PSI | |||||
SELECT UNITS | ||||||
| BATT VOLT | OIL PRES | ||||
ADJUST BACKLIGHT |
|
|
|
|
| |
3.Once the “Adjust Contrast” menu item has been highlighted touch the “Enter Button” to activate the “Adjust Contrast” function.
STORED CODES
ENGINE CONFG
SETUP
SELECT UNITS
ADJUST BACKLIGHT
ADJUST CONTRAST
4.Use the “Arrow Buttons” to select the desired contrast intensity
ADJUST CONTRAST
5.Touching the “Menu Button” will take you back through the menus.
PAGE 26 — DCA85USJ2 60 HZ GENERATOR • OPERATION AND PARTS MANUAL — REV. #1 (03/22/11)
