Multiquip SG1400C3-55748 manual maintenance, Engine Maintenance Schedule

maintenance

Use Table 14 as a general maintenance guideline when servicing your engine. For more detail engine maintenance information, refer to the engine owner’s manual supplied with your engine.

Table 14. Engine Maintenance Schedule

				INTERVAL
DESCRIPTION	OPERATION	DAILY3	250 HOURS	500 HOURS	1000 HOURS	2000 HOURS	5000 HOURS
			OR	OR	OR	OR	OR
			3 MONTHS3	6 MONTHS1,2,3	1 YEAR3	2 YEARS2,3	4 YEARS3
Air Intake Piping	Check	X
Engine Lubricating Oil Level	Check	X
Air Tank and Reservoirs	Drain	X
Crankcase and Breather Tube	Inspect	X
Engine Coolant Level	Check	X
Fuel -Water Separator	Drain	X
Air Cleaner Restriction	Check		X
Air Compressor	Check		X
Mounting Hardware
Charge-Air Cooler	Check		X
Charge-Air Piping	Check		X
Radiator Hoses	Check		X
Air Intake Piping	Inspect		X
Fan, Cooling	Check		X
Coolant Level	Check		X
Drive Belts	Check		X
Engine Coolant - Antifreeze	Check			X
Fuel Filter (Spin-On Type)	Replace			X
Lubricating Oil and Filters	Change			X
Radiator Pressure Cap	Check			X
Cooling Fan Belt Tensioner	Check				X
Fan Hub, Belt-Driven	Check				X
Air Compressor Discharge Line	Check					X
Cooling System	Drain					X
Vibration Damper, Rubber	Check					X
Vibration Damper, Viscous	Check					X
Overhead Set	Adjust						X

1.The lubricating oil and lubricating oil filter interval can be adjusted based on application, fuel consumption, gross vehicle weight, and idle time.

2.Antifreeze check interval is every oil change or 500 hours or 6 months, whichever occurs first.The operator must use heavy- duty, year-round antifreeze that meets the chemical composition of ASTM D6210. The antifreeze change interval is 2 years or 2000 hours whichever occurs first. Antifreeze is essential for freeze, overheat, and corrosion protection.

3.Follow the manufacturer’s recommended maintenance procedures for the starter, alternator, generator, batteries, electrical components, exhaust brake, charge air cooler, radiator, air compressor, air cleaner, refrigerant compressor, and fan clutch.

page 38 — SG1400C3 Studio Generator • operation and parts manual — rev. #1 (02/15/12)