Muratec MFX-2530 1, 2, 9, 5, 3, 4, 6, 7, 8

Advanced fax

To create or modify an F-Code box:

1Keep pen and paper with you as you follow these steps. As you decide on a

sub-address and enter it into your machine, write it down. Remember to: (1)

write down which box goes with which sub-address, (2) write down any pass-

words or

. codes you enter, (3) keep these printed records in a safe place.

2Press

,[Enter]. The

LCD

shows the

F-Code box list.

3Select the F-Code box you want to create or

modify using the cursor key.

Note: You can select the F-Code box by

directly entering that two-digit identi-

fier number (01-50).

Note: You can press [Detail] to see the number which has been pro-

grammed in that speed-dial number.

4Press [BoxSet].

What you do next depends on whether you’re

creating or modifying the F-Code box:

If creating — skip to step 6.

If modifying — the

LCD

asks you to enter the

proper

. code. The

LCD

shows (see right):

5Use the numeric keypad to enter the 4-digit

code (not the

ITU

sub-address and not the

ITU

password) and then press

[Enter].

• If you modifying the Security box, go to step 7.

• If you modifying the Bulletin box, skip to step 16.

• If you modifying the Relay box, skip to step 28.

Note: You cannot change the type of an existing F-Code box. If you’re modi-

fying an existing F-Code box and want to change the box type, you

first must erase the old box, then create a new one.

6The fax machine is asking which box type you

want to assign to this box — bulletin,security

or relay.

Select desired box type using the cursor key

and then press [Enter].

• If you chose Security, go to step 7.

• If you chose Bulletin, skip to step 16.

• If you chose Relay, skip to step 28.

If you chose Secur ity:

7The security box has the following settings:

•Box Name – You can enter the name for

this F-Code box.

•

ITU

sub-address – This is the numerical

identifier you must enter in order to commu-

nicate with any remote F-Code compatible

fax.

•

ITU

password – This is the password for

ITU

-compatible F-Code fax

transactions. You don’t need to have a password for the F-Code box.

However, using a password will make your F-Code communication much

more secure.

•Hold time – This setting is how long you want to keep a document stored

in your machine’s F-Code box.

•

. code for this F-Code box – This is the four-digit

. code for the

box’s security, which you use to (1) print a document any remote F-Code-

compatible fax sends to this F-Code box or (2) you enter before you can

make any changes to this F-Code box. (See step 12.)

8To enter the Box name:

Select “Box Name” using the cursor key, and then press [Enter].

Then, enter the name the same way you entered your fax name during

EasyStart. An F-Code box’s name can be up to 16 characters in length.

Note: To erase characters, press [Clear] to erase to the left.

To change just one character in the name, move the cursor to that

character and then press [Clear] to erase it. Then re-enter the name

correctly.

Press [Enter] to save the box’s name and continue.

9To enter the

ITU

sub-address:

Select “Sub-Address” using the cursor key, and then press [Enter].

Then, use the numeric keypad to enter this box’s

ITU

sub-address to identify

this F-Code box.

The sub-address can be up to 20 characters in length and include any combi-

nation of numbers and the * and # characters (but no other non-numeric

characters).

Note: No other F-Code box in this machine can have the same sub-address

as the one you enter here.

3.45

Fax Features Getting Started