Advanced fax
8Enter the fax number as described in step 4 on
page 3.17.
9When the number is as you want it, press
[Enter] to store it.
10 Enter Location
I
.
D
., Alternative number or
Group number as described in steps 7–15 on
pages 3.17–3.18.
Note: If you want to omit these settings, go to step 11.
11 Press [Exit].
Press
RESET
to finish.
To delete a speed-dial number:
1Press
MENU
,
B
, [Enter].
The
LCD
shows the speed-dial number list.
2Select the speed-dial number you want to
delete.
Note: You can select the speed-dial number by
directly entering that three-digit identi-
fier code. When entering the identifier
code for speed-dial numbers less than
100, you must enter leading zeroes to
make three digits. F or example , 001-099.
Note: You can press [Detail] to see the number which has been pro-
grammed in that speed-dial number.
3Press
NEXT
,[Delete].
4The machine will ask you if you want to delete
that speed-dial number.
Important: If you want to quit without delet-
ing the speed-dial number you’ve
selected, press [No]. The machine
will return to step 2.
5Press [Yes].
6The speed-dial number you selected will be
deleted and other numbers will be shifted
upward.
7Press
RESET
to finish.

Printing a list of speed-dial numbers

You can easily print a list of your speed-dial numbers. The list includes each number’s
three-digit identifier, the Location
ID
(if any), number and any group numbers
you’ve stored for that speed-dial number.
To print a list of speed-dial numbers, press
MENU
,
B
, [List].

Fax dialing via speed-dial

To dial a fax call using a speed-dial number:
1Place the document and select the resolution and contrast you require.
2Toggle between transmission from the feeder or from memory if necessary, by
pressing
MEMORY TRANSMIT
.
3Press
SPEED DIAL
/
TEL INDEX
.
4Use the numeric keypad to enter the three-digit identifier for the speed-dial
number you want to dial.
Note: If the location
ID
has been programmed, it is shown on the
LCD
.
Otherwise, the fax number is shown on the
LCD
.
5Press
START
.

3.20