Muratec MFX-2530 manual Sorting

2.6
Basic copy
Sorting
Your fax machine can sort copies in sequential order.
Non-Sort Sort
Shift Non-Sort (Optional shift tray is required) Shift Sort(Optional shift tray is required)
Note: You can make up to 99 copies at a time.
Note: The output tray can hold the following number of sheets.
Paper tray: 250 sheets
Optional 2-Bin tray (Upper): 100 sheets
Optional 2-Bin tray (Lower): 250 sheets
If the number of sheets exceeds the capacity, remove the sheets.
Note: You cannot copy from multi-paper tray with this feature .
Note: As a default, the non-sort is selected, You can change the default setting.
(See page 2.27.)
To copy with sorting:
1Press [Sort].
Note: “Shift Sort” and “Shift Non-Sort”
appears when your fax machine has the
optional shift tray.
2Select the sorting mode you want using the cur-
sor key, and then press [Enter].
3Enter the number of copies using numeric keypad.
4Set your documents, and then press
START .
When setting your document on the FBS glass:
1. Place the first page of your documents and then press START .
The machine scans the first page.
Note: When making 1-sided copies, the first set will print.
2. Set the next page and then press START .
Note: Set the document in the same direction as step 1.
3. After the all pages of your document are scanned, press [Exit].
When setting your documents in the ADF :
1. Set your documents and then press START .
Note: When making 1-sided copies, the first set of copies comes out first.
2. When the machine is finished scanning, the copies will be printed.
11
3
12
3
12
1
32
3
12
2
22
1
3
123 123 123 12
3
121 112 223 33