1.11
Getting started
2The machine returns to standby mode.
When you set the “Custom” paper, press
RESET
for standby mode.
Setting the paper type
When you set transparency films or thick papers in the multi purpose cassette, set
the paper type.
1Press
COPY
to change to the copy mode, if needed.
2Press
NEXT
, then press [Chg.Ppr.].
3Press [Ppr.Type] after confirming the 1st cassette is selected.
4Select the paper type using the cursor key.
Then press [Enter].
Note: Pressing
RESET
, the machine returns to
standby mode.
Getting Started